Straight-run wood-post configuration
Suzhou Lance Technology Co., Ltd.WWW.MR-RAIL.COM · MR.RAIL@FOXMAIL.COM
Products / MR-02Request quotation →
QUICK LOCK / SWAGELESS SYSTEM
Swageless Quick Lock Cable Railing Fittings for Wood-Post Level Runs
MR-02 / MR-12 / MR-22
A straight wood-post swageless Quick Lock pair for clean, level cable railing runs with push-in cable installation.
Material316 Stainless Steel
ApplicationWood posts · Level and straight runs
Cable1×19 stainless steel cable
Sizes1/8" · 5/32" · 3/16"
MODEL FAMILY
MR-021/8"MR-125/32"MR-223/16"
PRODUCT HIGHLIGHTS
Designed around the installation.
Push-in Quick Lock connection at both cable ends
No hydraulic crimper required
Available in three cable-size families
CONNECTION TECHNOLOGY
Quick Lock / Swageless connection method
The swageless Quick Lock connection uses internal one-way grip jaws to hold fully inserted, matching-diameter 1×19 cable without hydraulic crimping on that end. Push-in locking does not replace final cable tensioning.
Technology comparison →
INSTALLATION GUIDE
Reference installation steps for the model family.
The reference sequence applies within MR-02, MR-12, MR-22. Hole size, thread specification and tool size must follow the approved specification for the selected cable diameter and project configuration.
End functions and project configurations
An Ending secures a cable end without tension adjustment. A Tensioner provides the adjustment for tensioning the run. Ending + Tensioner and Tensioner + Tensioner are both possible configurations, selected for the actual installation and compatible components.
Swageless and Swage describe the cable connection, not the number of tensioning ends. Push-in locking does not replace final tensioning.
Standard model layouts are reference configurations, not a requirement to buy one fixed pair. MR.RAIL reviews standardized products, compatible component combinations and project-specific customization. Confirm the cable, post interfaces, adjustment access, exact components and quantities before ordering.
Mark aligned cable locations on both wood posts.
Install the wood-screw tails and attach the ending and tensioner fittings.
Cut and fully insert the matching 1×19 cable into both Quick Lock fittings.
Rotate the tensioner until the cable is correctly tensioned.
Tools and preparation
Drill when required by the post material, stainless steel cable cutter, wrench and pliers.
RELATED PRODUCTS
Continue building the system.
Model documentation and selection
Confirm the exact model, cable construction and diameter before ordering. The selected manual and approved project design govern installation; this page is not a structural or code-compliance certificate.
START YOUR CABLE RAILING HARDWARE PROJECT