Hinged fittings align with angled runs
Suzhou Lance Technology Co., Ltd.WWW.MR-RAIL.COM · MR.RAIL@FOXMAIL.COM
Products / MR-01Request quotation →
QUICK LOCK / SWAGELESS SYSTEM
Swageless Quick Lock Cable Railing Fittings for Wood-Post Stairs
MR-01 / MR-11 / MR-21
A hinged swageless Quick Lock pair designed to follow the angle of stair and sloped wood-post cable railing runs.
Material316 Stainless Steel
ApplicationWood posts · Stair and angled runs
Cable1×19 stainless steel cable
Sizes1/8" · 5/32" · 3/16"
MODEL FAMILY
MR-011/8"MR-115/32"MR-213/16"
PRODUCT HIGHLIGHTS
Designed around the installation.
Push-in Quick Lock connection at both cable ends
No hydraulic crimper required
Available in three cable-size families
CONNECTION TECHNOLOGY
Quick Lock / Swageless connection method
The swageless Quick Lock connection uses internal one-way grip jaws to hold fully inserted, matching-diameter 1×19 cable without hydraulic crimping on that end. Push-in locking does not replace final cable tensioning.
Technology comparison →
INSTALLATION GUIDE
Reference installation steps for the model family.
The reference sequence applies within MR-01, MR-11, MR-21. Hole size, thread specification and tool size must follow the approved specification for the selected cable diameter and project configuration.
End functions and project configurations
An Ending secures a cable end without tension adjustment. A Tensioner provides the adjustment for tensioning the run. Ending + Tensioner and Tensioner + Tensioner are both possible configurations, selected for the actual installation and compatible components.
Swageless and Swage describe the cable connection, not the number of tensioning ends. Push-in locking does not replace final tensioning.
Standard model layouts are reference configurations, not a requirement to buy one fixed pair. MR.RAIL reviews standardized products, compatible component combinations and project-specific customization. Confirm the cable, post interfaces, adjustment access, exact components and quantities before ordering.
Mark and prepare aligned mounting locations on both wood posts.
Install the hinged ending and hinged tensioner in the opposite posts.
Cut the matching 1×19 cable to the required length and insert both ends fully into the Quick Lock fittings.
Use the fitting wrench flats to complete final cable tensioning.
Tools and preparation
Drill, stainless steel cable cutter, wrench and pliers as required by the approved model specification.
RELATED PRODUCTS
Continue building the system.
Model documentation and selection
Confirm the exact model, cable construction and diameter before ordering. The selected manual and approved project design govern installation; this page is not a structural or code-compliance certificate.
START YOUR CABLE RAILING HARDWARE PROJECT